KitCab HT1

A Wi-Fi throttle kit you can build in an evening

The KitCab HT1 is an easy-to-build wireless model train throttle handset consisting of an electronic hardware kit and a 3D printable enclosure. You can connect it to DCC-EX or other compatible wireless command stations, and a “Guest Mode” feature makes it easy and enjoyable for advanced operators and novice drivers alike. 

Back it on Kickstarter in 2027, from under £100 for a KitCab HT1 hardware kit.

Total Wireless Freedom

A purpose built mainboard with open source “WiTcontroller” firmware allows you to move around your layout freely, whether you have a micro shunting puzzle or a sprawling exhibition layout. The HT1 will connect to any WiThrottle™ compatible command station, so you can use the throttle with existing wireless layouts. AA battery power provides endurance, and advanced users can optionally enable LiPo power with on-board USB-C LiPo charging..

All Operators Welcome

With the KitCab HT1 you never have to worry about handing the controller to a visitor on your layout, or eager little hands who want to drive a train. Six quick function buttons give instant access to basic locomotive functions, and the “Guest Mode” feature allows you to easily lock out the keypad and all menus - while the throttle knob and quick function buttons can still be used to control movement, lights and sound.

The KitCab HT1 hardware kit laid out: the mainboard, screen, keypad, battery box, springs, screws, cable and lanyard.

A Hassle-Free Build

You only need a screwdriver to build the KitCab HT1 - no soldering, wiring, or coding is required. If you have your own 3D printer, you can print the enclosure using the free 3D STL files in whatever colour scheme you want. You can also buy the enclosure ready-printed. The throttle can be assembled quickly using plug-and-play parts with all the fixings included in the hardware kit, then use the pre-installed firmware to start driving trains right away.

Build The Brain

If you don’t have a command station with Wi-Fi, you can also purchase a hardware kit for the DCC-EX powered KitCab EX-CS, which includes an ESP32 board, a DCC-EX motor shield and a power supply. This allows you to output DC, DCC main or DCC programming track power to each of the two track outputs. As with the HT1, the enclosure can be printed at home or bought separately. 

The HT1 and EX-CS together are a powerful and expandable control system that can grow with your confidence and ambitions.

Be first in line for KitCab HT1

Our Kickstarter launch is planned for spring 2027. Join the waitlist and we'll let you know the moment it goes live.


 WiTcontroller is written and maintained by P Akers, to whom we're continually grateful for supporting this project: github.com/flash62au/WiTcontroller

The WiThrottle™ trademark is the property of B Hoffman: withrottle.com